Sunglo Model PSA265, PSA265E and PSA265V Permanent Installation Natural Gas Heaters

Sunglo's Model PSA 265 heater is a permanent installation outdoor natural gas heater. This model works perfectly for open patio designs. This model uses an "in-ground" post that minimizes deck space need, positioning the heaters at just the right height for safety and comfort. Heat output will vary depending on wind conditions on your patio. Recommended spacing is approximately 12 feet between heaters.

This heater comes with a number of types of control systems, each with a 100% pilot-thermocouple safety shutoff feature. The heater is manual, meaning there is no electrical hookup needed.

The Model PSA265V comes with a solenoid gas valve, allowing this heater to be turned on or off with the simple touch of a switch.

The Model PSA265E is a great alternative with a completely automated ignition system is desired.

This series of heaters offer a large deep disk aluminum reflector that offers the maximum in comfort for you and your guests. They also come with a primary aerated burner that reduces noise output. The post component comes in 304 stainless steel or a glass black powder-coat finish.

This series of heaters do not require an electrical connection, making them easy to maintain and service. A manual control knob on the front of the heater allows users to easily turn the unit on or off.

Model PSA265V:

The Model PSA265V requires a 24 VAC electrical connection in order to operate the heater's main burner. The pilot is lit with a direct spark system and is turned off with a number of different control options, including and electrical timer, switch or other control device, supplied during installation. The manual control knob needs to remain in the "on" position in order for the electrical switch to function.

Model PSA265E:

PSA265E heaters require 24 VAC electrical to be connected in order to operate . This heater utilizes an electronic ignition and monitors the heater through flame rectification. Heater cannot be manually lit. Heater is turned off/on with electrical switch, timer or other control device by interrupting the 24 VAC supply to the heater. The control device will be supplied by the installer.

Clearance:

All of our heaters require clearance from any type of combustible items or materials. Heaters must have appropriate ventilation and fresh air to work correctly. If you have questions about clearance, contact us and we'll be happy to answer any of your questions. For more details, please download our Owners Manual/Installation Guide.