If you're interested in choosing the right infratech heater, just follow these 3 easy steps:
Step 1: Choose your measurements and mounting heights of the area you're heating
Step 2: Determine which heater or heaters that are right for your space. Then decide if you're going to mount them to your ceiling, wall or using the free-stand pole. Now you'll choose your controls.
Step 3: Choose your control - now determine which control works best for your needs. You can include value control installations or solid state controls.
| MODEL |
LENGTH |
WATTS |
CONTROL OPTIONS |
| |
VALUE |
or |
SOLID STATE |
| SINGLE ELEMENT |
| W-15 |
33" |
1,500 |
 |
|
 |
| W-20 |
39" |
2,000 |
|
|
|
| W-25 |
39" |
2,500 |
|
|
|
| W-30 |
61 1/4" |
3,000 |
|
|
|
| W-40 |
61 1/4" |
4,000 |
 |
|
|
| DUAL ELEMENT |
| WD-40 |
39" |
4,000 |
 |
|
|
| WD-50 |
39" |
5,000 |
|
|
|
| WD-60 |
61 1/4" |
6,000 |
|
|
|
| ICON KEY: |
 On/Off Switch |
 Input Regulators |
 Analog Control |
 Main Relay Control Panel |
 Duplex On/Off Switch (Half Power, Full Power) |
|
* Note: Well protected or indoor environments will usually exceed coverage areas. Heaters may provide less than average coverage in extreme weather conditions. |
